Product composition
This release film is made of PET(polyester film) as the base material, coated with single side silicone oil release agent, non-release surface coated with printable coating.
Product characteristics
1. Production and processing in a thousand-grade purified environment with high cleanliness;
2. Uniform coating, stable release force, small range of change;
3. Appearance without scratches, good smoothness, no wrinkles, no dirt, no crystal point;
4. High residual adhesion rate (≥85%), very little silicon transfer, no impact on the performance of the laminate material, no pollution;
Product specification
1. Width: 1090mm(can be customized according to customer requirements)
2. Length: 200m-3000m(can be cut and rewound according to customer requirements)
3. Core diameter (paper tube or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
Scope of application
Product packaging
1. Products are generally packed in cartons and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. It can also be packaged according to the customer agreement
instructions
1. Static electricity may be generated during unwinding or rewinding during use. The electrostatic layer will damage the release layer and lead to poor peeling. If necessary, anti-static treatment can be carried out on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to obtain the best use effect, it is recommended to use this product within 6 months from the purchase date;
3. It must be retested before use after expiration;
4. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%.
5. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed.
Product characteristics
){kind=link}