Product composition
This fluorine release film is made of blue PET (polyester film) as the base material and coated with fluorosilicone resin on one side.
Product characteristics
1. The coating is uniform and the release force is stable;
2. Small thickness tolerance and high transparency;
3. Low heat shrinkage and good flatness;
4. The residual adhesion rate is high (≥ 90%), which has no impact on the performance of the bonding material and no pollution;
Product specification
1. Width: 1060mm (can be customized according to customer requirements)
2. Length: 200-4000m (slitting and rewinding according to customer requirements)
3. Inner diameter of coil core (paper tube or plastic tube): 3 inches (76.2 mm) or 6 inches (152.4 mm)
Scope of application
It is applicable to silicone products (such as the bottom film of silicone products such as three-layer hot-pressing film, golden finger tape, high-temperature green tape, etc.; the die-cutting and punching of silicone products such as silicone protective film, PI tape, silicone double-sided adhesive tape, etc.).
Product packaging
1. Products are generally packed in cartons and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. It can also be packaged according to the customer agreement
instructions
1. Static electricity may be generated during unwinding or rewinding during use. The electrostatic layer will damage the release layer and lead to poor peeling. If necessary, anti-static treatment can be carried out on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to obtain the best use effect, it is recommended to use this product within 3 months from the purchase date;
3. It must be retested before use after expiration;
4. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%.
5. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed.
| Test items |
Standard value |
Testing standards |
notes |
| base material |
PET |
ASTM D3652 |
|
| Color |
Blue |
|
|
| appearance |
No dirt, wrinkles, scratches |
visualization |
|
| thickness |
50um |
Dial gauge thickness testing machine |
|
| release agent |
Fluorosilicone resin |
|
|
| 20min 180 degree release force |
6-10g/in |
FTM30 four-dimensional MY2G tape |
Single sided release |
| Residual adhesion rate |
≥90% |
Nippon 31B tape |
|
| tensile strength |
MD |
188MPa |
|
| TD |
215MPa |
|
| elongation at break |
MD |
198% |
ASTMD882 |
| TD |
147% |
ASTMD882 |
| The above test data is the average test value, not a guaranteed value, for reference only, and not used as an acceptance standard |
){kind=link}